Surgical Tech Interview Questions: How to Prepare for Your First OR Job
Published - August 28, 2026
Surgical tech interview questions for a first operating room job fall into four groups: sterile technique and instrument knowledge, how you handle pressure and mistakes, how you work with surgeons and nurses, and whether you hold or plan to earn the Certified Surgical Technologist (CST®) credential. Hiring managers want to confirm that a new graduate can be trusted at the back table on day one, so most questions test judgment rather than textbook recall. The stakes are worth preparing for: surgical technologists earned a median of $64,650 in May 2025, and hospitals, the largest employer, paid a median of $65,020.
The questions below reflect what operating room managers and surgical services educators commonly ask candidates fresh out of an accredited program. Each group includes what a strong answer contains.

Sterile Technique and Instrument Questions
The first group of scrub tech interview questions checks whether a candidate can maintain the sterile field and anticipate what a surgeon needs. These are the questions that separate a graduate who learned the material from one who practiced it.
What would you do if you noticed a break in sterile technique during a case?
A strong answer names the break out loud, immediately, regardless of who caused it, and describes the correction: replacing the contaminated item, re-gloving, or re-draping as the situation requires. Interviewers are listening for whether you would speak up to a surgeon.
Walk me through how you set up a back table and Mayo stand.
Describe the sequence you were trained in: opening supplies, gowning and gloving, organizing instruments by use, loading blades and sutures, and completing counts with the circulator before the incision. Mention that the layout follows the surgeon’s preference card.
How do you perform a count, and when do counts happen?
Counts of sponges, sharps, and instruments happen before the case, before closure of a cavity, and at skin closure, and both the scrub and circulator count aloud together. Explain what you do when a count is off: notify the surgeon, stop closure, search the field and floor, and request imaging if the item is not found.
Name the instruments you would expect on a laparoscopic cholecystectomy tray.
List the ones you know with confidence: trocars, graspers, Maryland dissector, clip applier, hook cautery, and the laparoscope with its light cord. Do not bluff. If you have not scrubbed a particular case, say so and describe a comparable one.
How do you handle a specimen?
Confirm the specimen name and source with the surgeon, keep it on the field until the circulator takes it, label it correctly, and document it. Lost or mislabeled specimens are treated as serious patient safety events, which is why this question shows up often.
CBD College’s guide to surgical tech duties lists the full scope of responsibilities these questions draw on.
Pressure, Mistakes, and Judgment
The second group tests composure. Operating rooms run on time pressure and zero tolerance for contamination, and managers want to know how a candidate behaves when something goes wrong.
Tell me about a time you made a mistake during a clinical rotation. What did you do?
Pick a real, small error, state it plainly, and spend most of the answer on the correction and what changed afterward. Interviewers distrust candidates who claim they have never made one.
A surgeon is frustrated and raising their voice. How do you respond?
Stay focused on the next instrument, keep your tone level, and do not take it personally. If the frustration points to something you can fix, fix it. If it crosses into abuse, you report it afterward through the chain of command. The answer they want is calm and task-focused.
How do you stay focused during a six-hour case?
Describe practical habits: anticipating the next steps of the procedure, keeping the field organized, hydrating and eating before the case, and communicating with the circulator about breaks when the case allows. CBD College’s day in the life of a surgical tech describes what a long shift looks like.
What would you do if you were asked to perform a task outside your scope?
Decline politely, explain that it falls outside what a surgical technologist is permitted to do, and offer to get the right person. Scope questions check whether you will protect the patient and yourself under pressure.
Teamwork and Communication
Surgical technologists work shoulder to shoulder with surgeons, registered nurses, anesthesia providers, and surgical assistants, which is why the BLS lists communication as a defining quality of the job. Expect several questions about it.
How would you describe the relationship between the scrub tech and the circulating nurse?
The circulator is your partner outside the sterile field. You depend on each other for counts, supplies, and patient safety, and the relationship works when both communicate early and clearly. Name a specific example from a rotation.
Describe a time you disagreed with a team member in the OR.
Keep it short and professional. Focus on how you raised the concern, what the outcome was, and what you learned about timing and tone.
How do you prepare for a case with a surgeon you have never worked with?
Read the preference card, ask the circulator or a senior tech what the surgeon expects, review the procedure steps, and set up early so you have time to ask questions before the patient arrives.
What does a good day in the OR look like to you?
A grounded answer: cases started on time, no breaks in technique, counts correct, instruments ready before they were requested, and a patient who left safely. Avoid describing drama or heroics.
Certification, Training, and Career Goals

The final group of surgical tech interview questions covers credentials and where you see the job going. Employers increasingly require or prefer certification, and the BLS notes that it may be beneficial for finding a job. The Certified Surgical Technologist credential, administered by the National Board of Surgical Technology and Surgical Assisting (NBSTSA), is the one CBD College’s program prepares graduates to earn.
Are you CST certified, or when do you plan to sit for the exam?
If you have passed, say so and bring documentation. If not, give a date. A new graduate of an accredited program who has a scheduled exam date is a stronger candidate than one who has not planned it. CBD College’s surgical tech certification guide explains eligibility and the exam format.
Where did you train, and what did your clinical rotations include?
Name your program, its accreditation, the number of cases you scrubbed, and the specialties you rotated through. Programs such as CBD College’s Surgical Technology program include supervised externships at hospitals and ambulatory surgery centers, and interviewers want specifics: general, orthopedic, OB/GYN, and so on.
Which specialties interest you, and why?
Pick one or two and give a reason tied to the work itself, such as the instrumentation in orthopedics or the pace of cardiac cases. Managers hire into service lines, so a clear preference can help.
Where do you see yourself in five years?
Reasonable answers include becoming a lead tech on a service line, precepting students, cross-training into a second specialty, or pursuing the surgical first assistant role, which paid a median of $66,800 in May 2025. CBD College compares the two roles in its surgical tech vs. surgical assistant guide.
Why this hospital?
Research the facility’s surgical volume, specialties, and any residency or new-graduate programs for surgical technologists. Tie your answer to something concrete.
Questions to Ask the Interviewer
Asking two or three informed questions signals that you understand the job. Good options for a first OR position:
- Is there a structured orientation or new-graduate program, and how long does it run?
- Which service lines would I be trained in first, and how are techs assigned to rooms?
- What is the typical call schedule for new technologists?
- How does the department support CST certification and continuing education?
- Who would I report to, and how is performance evaluated during the first 90 days?
Skip questions about pay and benefits in a first interview unless the interviewer raises them. Those belong to the offer stage.
How to Prepare in the Week Before
Preparation for surgical tech interview questions and answers comes down to rehearsal and documentation.
- Review your case log. Know how many cases you scrubbed, in which specialties, and which procedures you can describe step by step.
- Practice the sterile technique answers aloud. Managers can tell when an answer has been thought through versus improvised.
- Prepare three stories. One mistake you corrected, one conflict you handled, and one case that went well because of something you did. Each should take under a minute to tell.
- Bring a portfolio. Program completion documents, CST certificate or exam date, BLS or CPR certification, immunization records, and references from clinical instructors.
- Dress for the setting. Business casual, closed-toe shoes, no fragrance, hair secured. Some facilities include an OR walkthrough.
- Confirm the format. Some hospitals use panel interviews with the OR manager, an educator, and a senior tech. Others add a skills demonstration. Ask the recruiter in advance.
Graduates who completed a clinical externship through an accredited program already have most of the material these questions test. CBD College’s overview of what to expect during a clinical externship covers how that experience translates to the job search.
Get the Training Employers Ask About
If you are still choosing a program, the interview questions above show what hiring managers value: accredited training, real case experience, and CST readiness. CBD College’s hybrid Surgical Technology program in Los Angeles combines mock operating room training with supervised externships at local hospitals and ambulatory surgery centers, and prepares graduates to sit for the NBSTSA CST exam in as little as 18 months. Request information to see the next start date and talk with an admissions advisor.